ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CARTRIDGE-CAP','2022-05-02T',('Saeed'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2012130',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2012130','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#3=DIRECTION('',(0.E0,0.E0,1.E0));
#4=DIRECTION('',(1.E0,0.E0,0.E0));
#5=AXIS2_PLACEMENT_3D('',#2,#3,#4);
#7=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#8=DIRECTION('',(0.E0,0.E0,1.E0));
#9=DIRECTION('',(-1.E0,0.E0,0.E0));
#10=AXIS2_PLACEMENT_3D('',#7,#8,#9);
#12=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#13=DIRECTION('',(0.E0,0.E0,1.E0));
#14=DIRECTION('',(-1.E0,0.E0,0.E0));
#15=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#17=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#18=DIRECTION('',(0.E0,0.E0,1.E0));
#19=DIRECTION('',(1.E0,0.E0,0.E0));
#20=AXIS2_PLACEMENT_3D('',#17,#18,#19);
#22=DIRECTION('',(0.E0,0.E0,1.E0));
#23=VECTOR('',#22,1.3E0);
#24=CARTESIAN_POINT('',(3.555E1,0.E0,9.15E0));
#25=LINE('',#24,#23);
#26=DIRECTION('',(0.E0,0.E0,1.E0));
#27=VECTOR('',#26,1.3E0);
#28=CARTESIAN_POINT('',(-3.555E1,0.E0,9.15E0));
#29=LINE('',#28,#27);
#30=CARTESIAN_POINT('',(0.E0,0.E0,1.045E1));
#31=DIRECTION('',(0.E0,0.E0,1.E0));
#32=DIRECTION('',(1.E0,0.E0,0.E0));
#33=AXIS2_PLACEMENT_3D('',#30,#31,#32);
#35=CARTESIAN_POINT('',(0.E0,0.E0,1.045E1));
#36=DIRECTION('',(0.E0,0.E0,1.E0));
#37=DIRECTION('',(-1.E0,0.E0,0.E0));
#38=AXIS2_PLACEMENT_3D('',#35,#36,#37);
#40=CARTESIAN_POINT('',(0.E0,0.E0,1.045E1));
#41=DIRECTION('',(0.E0,0.E0,-1.E0));
#42=DIRECTION('',(1.E0,0.E0,0.E0));
#43=AXIS2_PLACEMENT_3D('',#40,#41,#42);
#45=CARTESIAN_POINT('',(0.E0,0.E0,1.045E1));
#46=DIRECTION('',(0.E0,0.E0,-1.E0));
#47=DIRECTION('',(-1.E0,0.E0,0.E0));
#48=AXIS2_PLACEMENT_3D('',#45,#46,#47);
#50=CARTESIAN_POINT('',(1.35E1,5.483113962867E-13,9.95E0));
#51=DIRECTION('',(4.061334601957E-14,-1.E0,0.E0));
#52=DIRECTION('',(-5.556444193644E-12,0.E0,1.E0));
#53=AXIS2_PLACEMENT_3D('',#50,#51,#52);
#55=CARTESIAN_POINT('',(-1.35E1,-5.439537709151E-13,9.95E0));
#56=DIRECTION('',(-4.029068745304E-14,1.E0,0.E0));
#57=DIRECTION('',(5.559996907323E-12,0.E0,1.E0));
#58=AXIS2_PLACEMENT_3D('',#55,#56,#57);
#60=CARTESIAN_POINT('',(0.E0,0.E0,9.95E0));
#61=DIRECTION('',(0.E0,0.E0,-1.E0));
#62=DIRECTION('',(-1.E0,0.E0,0.E0));
#63=AXIS2_PLACEMENT_3D('',#60,#61,#62);
#65=CARTESIAN_POINT('',(0.E0,0.E0,9.65E0));
#66=DIRECTION('',(0.E0,0.E0,1.E0));
#67=DIRECTION('',(1.E0,0.E0,0.E0));
#68=AXIS2_PLACEMENT_3D('',#65,#66,#67);
#70=DIRECTION('',(0.E0,-3.825511666703E-10,1.E0));
#71=VECTOR('',#70,3.E-1);
#72=CARTESIAN_POINT('',(-1.3E1,2.728773955846E-11,9.65E0));
#73=LINE('',#72,#71);
#74=CARTESIAN_POINT('',(0.E0,0.E0,9.95E0));
#75=DIRECTION('',(0.E0,0.E0,-1.E0));
#76=DIRECTION('',(1.E0,0.E0,0.E0));
#77=AXIS2_PLACEMENT_3D('',#74,#75,#76);
#79=CARTESIAN_POINT('',(0.E0,0.E0,9.65E0));
#80=DIRECTION('',(0.E0,0.E0,1.E0));
#81=DIRECTION('',(-1.E0,0.E0,0.E0));
#82=AXIS2_PLACEMENT_3D('',#79,#80,#81);
#84=DIRECTION('',(0.E0,3.825512129296E-10,1.E0));
#85=VECTOR('',#84,3.E-1);
#86=CARTESIAN_POINT('',(1.3E1,-2.728950453077E-11,9.65E0));
#87=LINE('',#86,#85);
#88=CARTESIAN_POINT('',(-1.35E1,2.594591208549E-13,9.65E0));
#89=DIRECTION('',(-1.921726666687E-14,-1.E0,0.E0));
#90=DIRECTION('',(1.907807245516E-12,0.E0,-1.E0));
#91=AXIS2_PLACEMENT_3D('',#88,#89,#90);
#93=CARTESIAN_POINT('',(1.35E1,-2.553235400882E-13,9.65E0));
#94=DIRECTION('',(1.891195533510E-14,1.E0,0.E0));
#95=DIRECTION('',(-1.914912672873E-12,0.E0,-1.E0));
#96=AXIS2_PLACEMENT_3D('',#93,#94,#95);
#98=CARTESIAN_POINT('',(1.35E1,0.E0,1.045E1));
#99=CARTESIAN_POINT('',(-1.35E1,0.E0,1.045E1));
#100=VERTEX_POINT('',#98);
#101=VERTEX_POINT('',#99);
#102=CARTESIAN_POINT('',(1.3E1,0.E0,9.95E0));
#103=CARTESIAN_POINT('',(-1.3E1,0.E0,9.95E0));
#104=VERTEX_POINT('',#102);
#105=VERTEX_POINT('',#103);
#106=CARTESIAN_POINT('',(1.3E1,-2.728950453077E-11,9.65E0));
#107=VERTEX_POINT('',#106);
#108=CARTESIAN_POINT('',(-1.3E1,2.728773955846E-11,9.65E0));
#109=VERTEX_POINT('',#108);
#110=CARTESIAN_POINT('',(-1.35E1,0.E0,9.15E0));
#111=CARTESIAN_POINT('',(1.35E1,0.E0,9.15E0));
#112=VERTEX_POINT('',#110);
#113=VERTEX_POINT('',#111);
#114=CARTESIAN_POINT('',(3.555E1,0.E0,9.15E0));
#115=CARTESIAN_POINT('',(-3.555E1,1.306085811291E-14,9.15E0));
#116=VERTEX_POINT('',#114);
#117=VERTEX_POINT('',#115);
#118=CARTESIAN_POINT('',(3.555E1,0.E0,1.045E1));
#119=CARTESIAN_POINT('',(-3.555E1,0.E0,1.045E1));
#120=VERTEX_POINT('',#118);
#121=VERTEX_POINT('',#119);
#122=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#123=DIRECTION('',(0.E0,0.E0,1.E0));
#124=DIRECTION('',(1.E0,0.E0,0.E0));
#125=AXIS2_PLACEMENT_3D('',#122,#123,#124);
#126=PLANE('',#125);
#128=ORIENTED_EDGE('',*,*,#127,.T.);
#130=ORIENTED_EDGE('',*,*,#129,.T.);
#131=EDGE_LOOP('',(#128,#130));
#132=FACE_OUTER_BOUND('',#131,.F.);
#134=ORIENTED_EDGE('',*,*,#133,.F.);
#136=ORIENTED_EDGE('',*,*,#135,.F.);
#137=EDGE_LOOP('',(#134,#136));
#138=FACE_BOUND('',#137,.F.);
#139=ADVANCED_FACE('',(#132,#138),#126,.F.);
#140=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#141=DIRECTION('',(0.E0,0.E0,1.E0));
#142=DIRECTION('',(1.E0,0.E0,0.E0));
#143=AXIS2_PLACEMENT_3D('',#140,#141,#142);
#144=CYLINDRICAL_SURFACE('',#143,3.555E1);
#145=ORIENTED_EDGE('',*,*,#127,.F.);
#147=ORIENTED_EDGE('',*,*,#146,.T.);
#149=ORIENTED_EDGE('',*,*,#148,.T.);
#151=ORIENTED_EDGE('',*,*,#150,.F.);
#152=EDGE_LOOP('',(#145,#147,#149,#151));
#153=FACE_OUTER_BOUND('',#152,.F.);
#154=ADVANCED_FACE('',(#153),#144,.T.);
#155=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#156=DIRECTION('',(0.E0,0.E0,1.E0));
#157=DIRECTION('',(1.E0,0.E0,0.E0));
#158=AXIS2_PLACEMENT_3D('',#155,#156,#157);
#159=CYLINDRICAL_SURFACE('',#158,3.555E1);
#160=ORIENTED_EDGE('',*,*,#129,.F.);
#161=ORIENTED_EDGE('',*,*,#150,.T.);
#163=ORIENTED_EDGE('',*,*,#162,.T.);
#164=ORIENTED_EDGE('',*,*,#146,.F.);
#165=EDGE_LOOP('',(#160,#161,#163,#164));
#166=FACE_OUTER_BOUND('',#165,.F.);
#167=ADVANCED_FACE('',(#166),#159,.T.);
#168=CARTESIAN_POINT('',(0.E0,0.E0,1.045E1));
#169=DIRECTION('',(0.E0,0.E0,1.E0));
#170=DIRECTION('',(1.E0,0.E0,0.E0));
#171=AXIS2_PLACEMENT_3D('',#168,#169,#170);
#172=PLANE('',#171);
#173=ORIENTED_EDGE('',*,*,#148,.F.);
#174=ORIENTED_EDGE('',*,*,#162,.F.);
#175=EDGE_LOOP('',(#173,#174));
#176=FACE_OUTER_BOUND('',#175,.F.);
#178=ORIENTED_EDGE('',*,*,#177,.F.);
#180=ORIENTED_EDGE('',*,*,#179,.F.);
#181=EDGE_LOOP('',(#178,#180));
#182=FACE_BOUND('',#181,.F.);
#183=ADVANCED_FACE('',(#176,#182),#172,.T.);
#184=CARTESIAN_POINT('',(0.E0,0.E0,9.95E0));
#185=DIRECTION('',(0.E0,0.E0,1.E0));
#186=DIRECTION('',(9.998608556441E-1,1.668140733692E-2,0.E0));
#187=AXIS2_PLACEMENT_3D('',#184,#185,#186);
#188=TOROIDAL_SURFACE('',#187,1.35E1,5.E-1);
#189=ORIENTED_EDGE('',*,*,#177,.T.);
#191=ORIENTED_EDGE('',*,*,#190,.T.);
#193=ORIENTED_EDGE('',*,*,#192,.F.);
#195=ORIENTED_EDGE('',*,*,#194,.F.);
#196=EDGE_LOOP('',(#189,#191,#193,#195));
#197=FACE_OUTER_BOUND('',#196,.F.);
#198=ADVANCED_FACE('',(#197),#188,.T.);
#199=CARTESIAN_POINT('',(0.E0,0.E0,9.95E0));
#200=DIRECTION('',(0.E0,0.E0,1.E0));
#201=DIRECTION('',(-9.998608556441E-1,-1.668140733692E-2,0.E0));
#202=AXIS2_PLACEMENT_3D('',#199,#200,#201);
#203=TOROIDAL_SURFACE('',#202,1.35E1,5.E-1);
#204=ORIENTED_EDGE('',*,*,#179,.T.);
#205=ORIENTED_EDGE('',*,*,#194,.T.);
#207=ORIENTED_EDGE('',*,*,#206,.F.);
#208=ORIENTED_EDGE('',*,*,#190,.F.);
#209=EDGE_LOOP('',(#204,#205,#207,#208));
#210=FACE_OUTER_BOUND('',#209,.F.);
#211=ADVANCED_FACE('',(#210),#203,.T.);
#212=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#213=DIRECTION('',(0.E0,0.E0,1.E0));
#214=DIRECTION('',(1.E0,0.E0,0.E0));
#215=AXIS2_PLACEMENT_3D('',#212,#213,#214);
#216=CYLINDRICAL_SURFACE('',#215,1.3E1);
#217=ORIENTED_EDGE('',*,*,#206,.T.);
#219=ORIENTED_EDGE('',*,*,#218,.F.);
#221=ORIENTED_EDGE('',*,*,#220,.T.);
#223=ORIENTED_EDGE('',*,*,#222,.T.);
#224=EDGE_LOOP('',(#217,#219,#221,#223));
#225=FACE_OUTER_BOUND('',#224,.F.);
#226=ADVANCED_FACE('',(#225),#216,.F.);
#227=CARTESIAN_POINT('',(0.E0,0.E0,9.15E0));
#228=DIRECTION('',(0.E0,0.E0,1.E0));
#229=DIRECTION('',(1.E0,0.E0,0.E0));
#230=AXIS2_PLACEMENT_3D('',#227,#228,#229);
#231=CYLINDRICAL_SURFACE('',#230,1.3E1);
#232=ORIENTED_EDGE('',*,*,#192,.T.);
#233=ORIENTED_EDGE('',*,*,#222,.F.);
#235=ORIENTED_EDGE('',*,*,#234,.T.);
#236=ORIENTED_EDGE('',*,*,#218,.T.);
#237=EDGE_LOOP('',(#232,#233,#235,#236));
#238=FACE_OUTER_BOUND('',#237,.F.);
#239=ADVANCED_FACE('',(#238),#231,.F.);
#240=CARTESIAN_POINT('',(0.E0,0.E0,9.65E0));
#241=DIRECTION('',(0.E0,0.E0,1.E0));
#242=DIRECTION('',(-9.999310468395E-1,1.174314976484E-2,0.E0));
#243=AXIS2_PLACEMENT_3D('',#240,#241,#242);
#244=TOROIDAL_SURFACE('',#243,1.35E1,5.E-1);
#245=ORIENTED_EDGE('',*,*,#133,.T.);
#247=ORIENTED_EDGE('',*,*,#246,.T.);
#248=ORIENTED_EDGE('',*,*,#234,.F.);
#250=ORIENTED_EDGE('',*,*,#249,.F.);
#251=EDGE_LOOP('',(#245,#247,#248,#250));
#252=FACE_OUTER_BOUND('',#251,.F.);
#253=ADVANCED_FACE('',(#252),#244,.T.);
#254=CARTESIAN_POINT('',(0.E0,0.E0,9.65E0));
#255=DIRECTION('',(0.E0,0.E0,1.E0));
#256=DIRECTION('',(9.999310468395E-1,-1.174314976483E-2,0.E0));
#257=AXIS2_PLACEMENT_3D('',#254,#255,#256);
#258=TOROIDAL_SURFACE('',#257,1.35E1,5.E-1);
#259=ORIENTED_EDGE('',*,*,#135,.T.);
#260=ORIENTED_EDGE('',*,*,#249,.T.);
#261=ORIENTED_EDGE('',*,*,#220,.F.);
#262=ORIENTED_EDGE('',*,*,#246,.F.);
#263=EDGE_LOOP('',(#259,#260,#261,#262));
#264=FACE_OUTER_BOUND('',#263,.F.);
#265=ADVANCED_FACE('',(#264),#258,.T.);
#266=CLOSED_SHELL('',(#139,#154,#167,#183,#198,#211,#226,#239,#253,#265));
#267=MANIFOLD_SOLID_BREP('',#266);
#269=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#271=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#270);
#272=(CONVERSION_BASED_UNIT('DEGREE',#271)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#274=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.005890758445E-2),#268,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#275=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#274))GLOBAL_UNIT_ASSIGNED_CONTEXT((#268,#272,#273))REPRESENTATION_CONTEXT
('ID1','3'));
#277=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#278=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#277);
#279=DESIGN_CONTEXT('',#277,'design');
#280=MECHANICAL_CONTEXT('',#277,'mechanical');
#281=PRODUCT('CARTRIDGE-CAP','CARTRIDGE-CAP','NOT SPECIFIED',(#280));
#282=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('4','LAST_VERSION',#281,
.MADE.);
#286=PRODUCT_CATEGORY('part','');
#287=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#281));
#288=PRODUCT_CATEGORY_RELATIONSHIP('','',#286,#287);
#289=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#290=SECURITY_CLASSIFICATION('','',#289);
#291=CC_DESIGN_SECURITY_CLASSIFICATION(#290,(#282));
#292=APPROVAL_STATUS('approved');
#293=APPROVAL(#292,'');
#294=CC_DESIGN_APPROVAL(#293,(#290,#282,#283));
#295=CALENDAR_DATE(122,2,5);
#296=COORDINATED_UNIVERSAL_TIME_OFFSET(8,0,.BEHIND.);
#297=LOCAL_TIME(17,41,5.1E1,#296);
#298=DATE_AND_TIME(#295,#297);
#299=APPROVAL_DATE_TIME(#298,#293);
#300=DATE_TIME_ROLE('creation_date');
#301=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#298,#300,(#283));
#302=DATE_TIME_ROLE('classification_date');
#303=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#298,#302,(#290));
#304=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#305=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#306=PERSON_AND_ORGANIZATION(#304,#305);
#307=APPROVAL_ROLE('approver');
#308=APPROVAL_PERSON_ORGANIZATION(#306,#293,#307);
#309=PERSON_AND_ORGANIZATION_ROLE('creator');
#310=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#306,#309,(#282,#283));
#311=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#312=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#306,#311,(#282));
#313=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#314=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#306,#313,(#290));
#315=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#316=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#306,#315,(#281));
#6=CIRCLE('',#5,3.555E1);
#11=CIRCLE('',#10,3.555E1);
#16=CIRCLE('',#15,1.35E1);
#21=CIRCLE('',#20,1.35E1);
#34=CIRCLE('',#33,3.555E1);
#39=CIRCLE('',#38,3.555E1);
#44=CIRCLE('',#43,1.35E1);
#49=CIRCLE('',#48,1.35E1);
#54=CIRCLE('',#53,5.E-1);
#59=CIRCLE('',#58,5.E-1);
#64=CIRCLE('',#63,1.3E1);
#69=CIRCLE('',#68,1.3E1);
#78=CIRCLE('',#77,1.3E1);
#83=CIRCLE('',#82,1.3E1);
#92=CIRCLE('',#91,5.E-1);
#97=CIRCLE('',#96,5.E-1);
#127=EDGE_CURVE('',#116,#117,#6,.T.);
#129=EDGE_CURVE('',#117,#116,#11,.T.);
#133=EDGE_CURVE('',#112,#113,#16,.T.);
#135=EDGE_CURVE('',#113,#112,#21,.T.);
#146=EDGE_CURVE('',#116,#120,#25,.T.);
#148=EDGE_CURVE('',#120,#121,#34,.T.);
#150=EDGE_CURVE('',#117,#121,#29,.T.);
#162=EDGE_CURVE('',#121,#120,#39,.T.);
#177=EDGE_CURVE('',#100,#101,#44,.T.);
#179=EDGE_CURVE('',#101,#100,#49,.T.);
#190=EDGE_CURVE('',#101,#105,#59,.T.);
#192=EDGE_CURVE('',#104,#105,#78,.T.);
#194=EDGE_CURVE('',#100,#104,#54,.T.);
#206=EDGE_CURVE('',#105,#104,#64,.T.);
#218=EDGE_CURVE('',#107,#104,#87,.T.);
#220=EDGE_CURVE('',#107,#109,#69,.T.);
#222=EDGE_CURVE('',#109,#105,#73,.T.);
#234=EDGE_CURVE('',#109,#107,#83,.T.);
#246=EDGE_CURVE('',#113,#107,#97,.T.);
#249=EDGE_CURVE('',#112,#109,#92,.T.);
#268=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#270=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#273=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#276=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#267),#275);
#283=PRODUCT_DEFINITION('design','',#282,#279);
#284=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CARTRIDGE-CAP.',#283);
#285=SHAPE_DEFINITION_REPRESENTATION(#284,#276);
ENDSEC;
END-ISO-10303-21;