Created by

Author:

Department:

Created Date:
19.8.2015.

Reviewed by

Reviewer:

Department:

Model Created Date:
19.8.2015.
Reviewer Comments:

Executive Summary

This is where to put your Executive summary. So, replace this text with your overall Project Description.

Summary

Model Information

Analysis Type - Static Stress with Linear Material Models
Units - Custom - (N, mm, s, °C, K, V, ohm, A, J)
Model location - C:\Users\Ugljesa\Desktop\Turbokompr\Assembly1.fem
Design scenario description - Design Scenario # 1

Analysis Parameters Information

Load Case Multipliers

Static Stress with Linear Material Models may have multiple load cases. This allows a model to be analyzed with multiple loads while solving the equations a single time. The following is a list of load case multipliers that were analyzed with this model.

Load Case	Description	Pressure/Surface Forces	Gravity/Acceleration	Angular Velocity (Omega)	Angular Acceleration (Alpha)	Displacement	Thermal	Electrical
1	Load Case Description	1	0	0	0	1	0	0

Centrifugal Information

Angular Velocity (Omega) Magnitude = 0 (RPM)

	X	Y	Z
Rotation Center Point (mm)	0	0	0
Rotation Axis	0	0	0

Angular Acceleration (Alpha) Magnitude = 0 (RPM/s)

	X	Y	Z
Rotation Center Point (mm)	0	0	0
Rotation Axis	0	0	0

Multiphysics Information

Default Nodal Temperature	0 °C
Source of Initial Nodal Temperatures	Loads from FEA Editor
Time step from Heat Transfer Analysis	Last
Default nodal voltage	0 V
Source of nodal voltages	Model file

Processor Information

Type of Solver	Automatic
Disable Calculation and Output of Strains	No
Calculate Reaction Forces	Yes
Invoke Banded Solver	Yes
Avoid Bandwidth Minimization	No
Stop After Stiffness Calculations	No
Displacement Data in Output File	No
Stress Data in Output File	No
Equation Numbers Data in Output File	No
Element Input Data in Output File	No
Nodal Input Data in Output File	No
Centrifugal Load Data in Output File	No

Part information was requested, but no complete parts were detected.

Loads

FEA Object Group 1: Surface Moments

Surface Moment

ID	Description	Part Number	Surface Number	Magnitude (N·mm)	Direction
1	Unnamed	5	190	1000	(0, 1, 0)

Constraints

Constraint data was requested, but no constraints were detected.

Results Presentation Images

No Results Images available.

Reviewer:
Department:
Model Created Date:	19.8.2015.
Reviewer Comments: